Gwyn Lewis Front Challenge Shock Turret – 2″ Lift – Comes as a Pair including Re-Locators – For Defender, Discovery 1 and Range Rover Classic

These turrets are for our challenge suspension kit and to be used when fitting our + 5.5 inch, 11 inch travel dampers.
Couple with our Heavy Duty Turret Securing Rings GL1053 to Secure theses Turrets to your Chassis.
They have a built in spring re locator to guide the spring back in if it dislocates, its the same as fitting dislocation cones but it is built all in one to cut the cost of 2 items.
The turret base plate also has flats faces cut in them, this is to minimise any tyre rubbing on full articulation and makes it easier to fit the turret under the inner wing, you can see this on one of the pictures.
These turrets are handed, the hole in the upper leg must be fitted towards to the front of the vehicle and the longer part of the relocator must go against the chassis.
Sold as a pair and they are also galvanized to prolong life.
When Fitting our +2″ Turrets to 200/300tdi Defenders you will need to space out your coolant header tank to stop the top of the shock fowling on the bottom of the tank